Quick installation

The mounting of the Flexi and Mini models in the Easy-Vent for renovation series is carried out quickly and without complications. Neither the radiator nor the window sill need to be removed. The wall ducts are delivered cut to length and the facade grille can often be mounted from the inside.

Use the existing trickle vent

If there is already a trickle vent in the wall below the window sill mounting is even easier. It can then be used as an air intake. The trickle vent front cover is removed and the Flexi air terminal is simply screwed over the intake. Fresh air is then both filtered and pre-warmed while at the same time significantly reducing the noise level from the exterior.

Snabb installation - Acticon

Complete installation in 30 minutes

Acticon

Drill two 51-55 mm or one 85 mm hole through the wall above the radiator (Flexi). If the Mini model is going to be used then the hole or holes are drilled below or beside the radiator.

Acticon

The duct, which is equally as long as the thickness of the wall, is placed into the hole.

Acticon

The bendable Flexi is easily positioned behind the radiator and held in place with two screws at the upper edge.

Acticon

Then the filter is placed into the upper portion of the air terminal.

Acticon

Push the cleaning cover firmly shut. The cleaning cover can easily be opened without the use of any tools when it is time to change the filter.

Acticon

Place the facade grille over the duct. If the duct is to be placed above the radiator the grille can often be mounted through the window from the inside.